Kawasaki Versys Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
481 Posts
Discussion Starter #1

·
Registered
Joined
·
74 Posts
I used Soupy's lowering links on mine. Worked well but I did not check how they were adj. when I put them on and I pushed it off the center stand and
found it would not stand on the side stand and I did could not get it back on
the center stand. It would have made a funny video :smile2:
Thank goodness my wife was near by to help.
http://soupysperformance.com/lowering-links.html
 

·
Registered
Joined
·
16 Posts
And I was looking for lowered foot pegs. :frown2: Has anyone seen anything suitable for the V-X300?
Motowerk.com has footpeg lowering blocks for the VX300. I've installed some and like them alot. Worst thing is, lowering the shifter rotates it almost too close to the footpeg. I've managed ok but will probably modify the shifter sooner or later.
 

·
Registered
Joined
·
481 Posts
Discussion Starter #5
Motowerk.com has footpeg lowering blocks for the VX300. I've installed some and like them alot. Worst thing is, lowering the shifter rotates it almost too close to the footpeg. I've managed ok but will probably modify the shifter sooner or later.
Thanks for that. I have just ordered some. It's not really a problem but I have some on my V-Strom and they make the transition to standin much easier - and less lean down to the bars when standing.
 
1 - 5 of 5 Posts
Top