Kawasaki Versys Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1,255 Posts
Discussion Starter · #1 · (Edited)
I got my Lowering block and bigfoot from Speedy today and everything went fine until I tried to mount the 6mm screw into the frame. I have a hugger on the bike and it must be cut away for the Lowering block to sit properly on the frame. I have attached some pictures.

I also manufactured a frame support out of tubing that measures 15" wide and 5 1/2" high. As you can see in the pictures it picks up under the pegs. I live on the East side of Dallas so anyone in the area needing assistance in puting these on can contact me. I have a lift and all the tools necessary. I'll be happy to help.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top