Kawasaki Versys Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
125 Posts
Discussion Starter #1
I searched through the forum and came up with some older threads that didn't quite answer my question or drifted off to wind screen discussion.

I want a lower handle bar position. It appears that there is not much room to drop the bars (go to a different bar with less rise) without hitting the fairing.

The closest thing to a solution that I could find from the threads was one member buying a Rox riser which allowed him to move the bars forward and then buying a different set of bars with a little less rise. This gave him more of a leaned over position with a little drop in height.

Are there any other solutions to putting lower bars on the versys? The stock set up put my arms at what I feel is an awkward angle.

Thanks
 
1 - 2 of 2 Posts
Top