Kawasaki Versys Forum banner

How to clear a check engine light and fix the issue?

1 reading
12K views 17 replies 6 participants last post by  onewizard  
See video below.
Was the video removed? First thing I would suggest is cleaning ALL your frame grounds . The dash uses a USB type power supply from the ECU-Which happens to depend Solely on frame grounds. What I mean by that, there isn't a copper wire ground connection directly to the negative ground circuits of the wire harness. The second thing is to clean your engine ground, ( which really is the primary negative connection used by the starter).

As to code reading.
 
Many special connectors are never needed if you ask the right questions and have some ingenuity.
As a example, I purchased the wiring harness adapter for the TPS, it was something like $20 from the Dealer. @invader made his own.

 
  • Like
Reactions: JT in GA