Kawasaki Versys Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
41 Posts
My switch has a lamp in it that lights up when driving lights are on. So mine also had 3 leads. You need a source of power, you may want it switched power, only on when bike is running. You have the output to the relay control input. If the switch has a lamp it will need a ground to allow the lamp to work.
Keep in mind I am describing mine, cannot tell enough from your description and pics.
Need to get it right the 1st time so no damage occurs.
 
1 - 1 of 1 Posts
Top