Joined
·
44 Posts
A bit late to the party, but I've been very happy with my Centech fuse panel for adding accessories. I think it's slightly cheaper than the Fuze, but haven't done any serious price comparison.
http://www.centechwire.com/catalog/panels/ap1.shtml
On more tip about soldering connections: I've found that heat shrink tubing wrap works really well for sealing up soldered wires. Electrical tape can get less sticky with age whereas this shrink wrap seems to hold up pretty well. All you need is a heat gun/hair dryer to shrink it down over the connection and you're good to go!!
Here's an example of what I'm talking about. Just remember to feed it on before you solder or connect everything up!
http://www.amazon.com/Anytime-SHRINK-TUBING-SLEEVES-ASSORTED/dp/B000F7RB4Q/ref=pd_cp_hi_1
http://www.centechwire.com/catalog/panels/ap1.shtml
On more tip about soldering connections: I've found that heat shrink tubing wrap works really well for sealing up soldered wires. Electrical tape can get less sticky with age whereas this shrink wrap seems to hold up pretty well. All you need is a heat gun/hair dryer to shrink it down over the connection and you're good to go!!
Here's an example of what I'm talking about. Just remember to feed it on before you solder or connect everything up!
http://www.amazon.com/Anytime-SHRINK-TUBING-SLEEVES-ASSORTED/dp/B000F7RB4Q/ref=pd_cp_hi_1
