Kawasaki Versys Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
293 Posts
Yes I would definitely adjust all of your valve lash clearances now... I just sanded a few of my shims mine down by hand to desired thickness with wet emery cloth, and switched a few around to have them all at near middle of spec range; 0.18mm inlet and 0.26mm exhaust.
Agreed. Go through all of them. Sand down and move around, no need to waste money on buying extra shims. Easy to get the clearance exactly as you want. :goodluck:
 
1 - 1 of 1 Posts
Top