Kawasaki Versys Forum banner

1 - 15 of 15 Posts

·
Registered
Joined
·
275 Posts
Discussion Starter #1
Anyone here with a 650 versys with the madstad on it? I am totally pulling the trigger on this setup over the winter...I was waiting for it to be developed....they hit a home run....plus a spot to mount my gps mount is a bonus!
 

·
Registered
Joined
·
252 Posts
Not the prettiest solution but I've no doubt it is effective. I had a similar setup on my scooter with a large barn door type windshield that came up to my chin with at least an inch gap at the bottom. The aerodynamics of this means the air that comes over the windshield gets sucked down behind it (think aircraft wing). Upshot is you have a continual downdraft pulling water off your visor! Once you've experienced that everything else is just crap.

I just installed the MRA Vario in the hope to get the same effect but no joy. It's a slight improvement over the stock windshield but only just.
 

·
Registered
Joined
·
58 Posts
I'm going to be getting one of these. I had a madstad setup for the Ulysses and it was the best!
I had a madstad on a '07 12s buell that i just made a adapter plate for my '09 verseys, works great with a bigger windshield i cut down a little.
 

·
Registered
Joined
·
21 Posts
I had a madstad on a '07 12s buell that i just made a adapter plate for my '09 verseys, works great with a bigger windshield i cut down a little.
My brotha from anotha motha! I had a Madstad on my '06 Uly with a tall CalSci windshield. LOVED that setup but it all went with the bike when I sold it.
 
1 - 15 of 15 Posts
Top