Kawasaki Versys Forum banner

Anyone added LED's on their Versys X 300?

4K views 7 replies 4 participants last post by  Brockie 
#1 ·
Just curious how you wired them in. I see a couple of switched options and mine are very low power/draw for day time visibility use mainly.
 
#3 · (Edited)
I went ahead and ordered a full LED relay wiring harness with a waterproof switch off of Amazon for $9. Then the power wires will run back to the battery and the relay wire will run to the power accessory power wire to trip the relay to send power only when the key is turned on. They are only 10W LED's for visibility. I run them all of the time.
 
#8 ·
I replaced the running lights either side of the headlight with LED's. They are white but with a 6000K colour temperature which gives them a blue hue - so much brighter, better looking and more effective than the OEM bulbs that are brown in comparison with even the OEM headlight. I wanted an LED H/L bulb as well but the store only had them in pairs.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top