Kawasaki Versys Forum banner

Discussions Showcase Albums Media Media Comments Tags

1-15 of 31 Results
  1. 💬General Discussions - V-650
    Hello, I am looking for a way to stop the heavy buffering on the helmet at highwayspeed. I am 1.89 m tall and ride the 2010 (gen2) versys 650. I had the MRA screen with spoiler first but now bought the givi screen wich is even taller. Still a lot of buffering wich wears out on my daily 140 km...
  2. Wanted
    Looking for inexpensive hard bags, My bike came set up for givi hardware with rack etc MONOKEY....The PO of the bike apparently laid down kinda hard on left side and destroyed the hard case, the cheap givi 22liter thingies, one can only order them in pairs, and not singular. They serve the...
  3. Modifications - Cosmetic - V-650
    Hi all, I'm looking to install a higher windshield on my versys 650 from 2014. I'm 6.5 and i was looking at the Givi Airflow since that looks like the tallest one I can find but according to the givi website it wont fit the gen2 versys. Are there any alternatives at the same height?
  4. Wanted
    Long shot I know, but looking for the right side Givi TN422 crash bars/engine guard for a 2nd Gen 2010-2014 Versys 650. I have all the hardware. If selling both sides, I may still be interested.
  5. Modifications - Cosmetic - V-650
    Hey there. I keep looking and looking for something compatible with my current setup. I need rear cargo rack that will somehow fit with Givi V35 side cases and Givi mounting rack. Is there anything that will work?
  6. Modifications - Cosmetic - X300
    My biggest issue when looking online was finding front view of how they looked installed. Were they going be close to the plastic or stick way out like the bumpers on go karts at the local funplex or whatever. Anyway, here's some pics of them installed, I'm quite happy and install was easy.
  7. 🖐Member Introductions
    Glad I found this forum and hope to get valuable info to keep my Versys running strong and reliable. I bought my 2016 Versys 650 back in June 2018. Had only 450 miles on it. Came with GIVI cases, Sargent lower profile touring seat, gear indicator, and 12V power socket. I was almost to the...
  8. 💬General Discussion - X300
    I've purchased my racks and side cases. Went with Givi racks and Apache side cases (Pelican knock-off). The racks should be plenty strong with three points of attachment on each side plus a rear cross bar. Should provide some protection for the bike if (when?) there is a tip-over. The cases...
  9. Modifications - Cosmetic - V-650
    I'm looking to get hard cases for my 2015 Versys 650 ABS. I'm debating between getting the Givi PL4114/E22N setup vs the KQR 28 factory bags. Did anybody add on the KQR 28 saddlebags on existing bike? If so, did you pay the full MSRP on all that (bags, fitting kit, one key, panels, etc)...
  10. 🖐Member Introductions
    Hi, all! Gosh, so what do I put in an intro post? I didn't meet motorcycles until I headed off to college, but I love to ride and dearly miss, after it was stolen from our apartment parking lot in our newlywed days, my '86 Yamaha FJ1200, which took me and my then-fiancee on a great 9-week...
  11. 💬General Discussions - V-650
    I would love some advice, or just a point in the right direction. I had a Givi bracket installed, and a V47 top case sat on that until the bracket broke into pieces and damaged my subframe (see attached pic). This probably had something to do with overloading the top case and the awful terrain...
  12. Modifications - Cosmetic - V-650
    Hey, I'm tidying up the rear of my 2010 Versys. It came with a Givi top box set up that I'm trying to remove, but am stumped with how it's removed. The rear-most bolts are straight-forward to remove, but the ones under the seat don't seem to have any obvious way to remove them. Let me know if...
  13. 💬General Discussions - V-650
    I have a Givi topcase with brakelights and turn signals that I am trying to hook up. The connector has only two wires. How do I wire them to my 2009 Versys 650? What color wire am I looking for?
  14. 🦺Rider's Gear
    Recently purchased the Givi 3D603 tank bag and adapter ring. A similar but larger model is available at a slightly increased price. Givi has given it's molded tank bag line the 3D name, since they have a more complex 3D shape and are made of flexible plastic, textured to look like fabric rather...
  15. 💬General Discussions - V-650
    Hi All, I just ordered these from Revzilla. They are the Givi Trekker 46L bags. Now that I have them on the bike I am rethinking if I should return them and get the next size down, the 33L. It just looks a little cartoonish and maybe overkill. They look huge on the bike but I don't think there...
1-15 of 31 Results