Join Date: Nov 2008
Location: Kitchener Ontario
Mentioned: 49 Post(s)
See The Problem
Ok no where in the manual does it show how to remove the plastic using push pins. Which look like rivets or Quick Rivet page 108 of the 2015 650 owners manual, located under sticky in the How To Forum under
Service & Owners Manuals MK-1,MK-2,MK-3 FYI this is a members only forum, please no links to this or sharing on other sites. If you look at the X300, that plastic for the windsheild has push pin or Quick rivets near the bottom and several other places, do yourself a favour and remove all this, what doesn't have push pins has bolts or allen cap screws, pay attention to lengths and make notes when removing, what went together really does come apart, some patience is required. The Quick Rivets release by gently pushing in the center of the rivet about 1/8 of a inch, you will feel it click in place, then pull the complete Quick rivet out using your finger nails, to re-install , the center gets reversed and sticks out the opposite side, The 650 owners manual displays this with photos page 108.