Footpegs and rear brake lever
Hi crew. I have two questions. first one is regarding footpegs.. the stock ones are sure lame.. I've seen threads for adding a peg lower kit, and then offroad style pegs.. but specifically
1. Do I need to install the lowering kit in order for it to work with aftermarket pegs? looking at the stock mounts, they seem fairly standard.. but seems most threads mention the kit + pegs.
2. Are there reasonable peg choices that aren't $100+ IMS titanium, diamond tipped etc. I would just like a slightly larger (i.e. non sport bike) peg with some teeth for gripping, but also not full on MX pegs.. and under $50 please.. ideally, ones like the SW Mototech with the removable inserts, but $120 is too much for a set of pegs
third question is.. how does one modify the rear brake lever height? it is severaly low and not sure if they come stock that way, or the previous owner set it that way. I spent a couple of minutes looking underneath to see if the lever was easily adjustable, and couldn't really tell due to the linkage going in to the brake master cylindar and it was a bit dark under there. Hopefully it's just a matter of removing the linkage, the return springs, and taking the lever off the mount, and rotating it a bit as you would with a shift lever?