Kawasaki Versys Forum banner

Electrical questions - Lights

2K views 14 replies 5 participants last post by  jaaklucas 
#1 · (Edited)
Hi guys, I need some electrical advise, hope someone here can help out :) I have a 2016 Versys 650 and:

I replaced low/high beam with LEDs (40W each)
I also added two auxiliary LEDs lights (40W each)
And replaced the corner lights with 2 1.8W LEDs

I had a local mechanic wire things up but not the way I wanted. He said he didn't want to cut into the existing wiring - so I am trying to figure out if we should just run new cables from the battery or have him work with the existing wires.

What I would like to do is to be able to have individually be able to turn on low beam and high beam (so one switch for each) and another switch for the auxiliary lights. On top of that I'd like the passing switch to turn on all 4 lights.

Attached is a diagram of how I think it could work, but given that I have almost no electrical knowledge I wonder what you guys think? What's missing etc?

Also is running the 4 lights gonna put too much strain on the generator/battery?

BTW here are links to the lights:
https://www.aliexpress.com/item/32679019890.html
https://www.aliexpress.com/item/32955132733.html
https://www.aliexpress.com/item/32958065186.html

Thanks!
 

Attachments

See less See more
1
#6 ·
#7 ·
Distribution Point
Room for photos
 
#9 ·
Sounds like hes got his numbers wrong. Ive got 36W per side LED headlights, close to blinding due to my MK3 inefficient reflector design. They need to be aimed properly to not blind oncoming. And I have 18W Aux lights with a hi-lo switch. This is more the norm. Maybe he means 20W per side....
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top