Kawasaki Versys Forum - View Single Post - Oxford Heated Grips
View Single Post
post #2 of (permalink) Old 10-30-2017, 12:47 PM
onewizard
Super Moderator
 
Join Date: Nov 2008
Location: Kitchener Ontario
Posts: 6,906
Mentioned: 28 Post(s)
2015 650 abs

Quote:
Originally Posted by CuddyBuddy View Post
I've just picked up a 2012 Versys 1000. Loving the Versys so far! A few have recommended Oxford Heated grips. Two questions. One, which Oxford Grips have people chosen? There appears to be three choices, of which only two probably make sense. Heated Grips / Hot Hands - Oxford Products USA Inc.

Heaterz Premium Adventure - Heated Grips
They will fit onto most motorcycles that use 7/8" (22mm) handlebars. Each grip has an open end to allow the bar end weight to be refitted without the need to trim the grip. The standard length of the Premium Adventure Heaterz grip is 5.19" (132mm). Should the length need to be shortened, they can be trimmed to a minimum length of 4.80"

Heaterz Premium Touring - Heated Grips
They will fit onto most motorcycles that use 7/8" (22mm) handlebars. Each grip has an open end to allow the bar end weight to be refitted without the need to trim the grip. The standard length of the Premium Touring Heaterz grip is 4.72"" (120mm). Should the length need to be shortened, they can be trimmed to a minimum length of 4.37"

Second question - where are people placing the control unit?

TIA.

Paul
Heaterz Premium Adventure - Heated Grips That is what I have and as to the controller, looks like I need to take more photos.





Not the best of pictures but I installed the mirror extenders because my Oxford controller was slamming into my tank bag, plus I needed more real estate for my Garmin

Last edited by onewizard; 10-30-2017 at 01:04 PM.
onewizard is offline  
 
 
For the best viewing experience please update your browser to Google Chrome