MRA Windscreen Review - Kawasaki Versys Forum
Register Members List Calendar Search Today's Posts Mark Forums Read Motorcycle EscrowInsurance
Go Back   Kawasaki Versys Forum > Kawasaki Versys Motorcycle Talk > Modifications - Cosmetic

 

Modifications - Cosmetic Discuss aftermarket and Do-It-Yourself cosmetic modifications

Reply
 
Thread Tools Display Modes
  #1  
Old 12-08-2012, 11:09 AM
sanderm sanderm is offline
Member
 
Join Date: Oct 2012
Location: Dallas, TX
Posts: 9
Default MRA Windscreen Review

I recently purchased the MRA Windscreen (Made in Germany) from twistedthrottle.com for approximately $140 shipped. I have a black 2012 Versys. You will find several attached images from the installation including before and after pics.

Installation

The installation was extremely simple. You remove the stock windscreen by removing the screws from the well nuts. Attach the two mounting brackets from MRA using the stock screws. Attach the new screen to the brackets using the new screws and you are good to go. There is a rubberized trim peice that you can install around the edge of the windscreen. I added some rubber washers between the MRA metal washer and the windscreen. I purchased them at Home Depot for $1. I will explain why later on. I also purchased extra OEM well nuts to plug up all the exposed holes which also makes adjustment easier as you don't have to pull the well nuts out anymore. I wasn't crazy about the additional brackets needed as they don't look clean under the windscreen.

Appearance

As you can see from the windscreen comparison photo, the MRA windscreen is much larger than stock. This gives the Versys a completely different look. I decided to go with the smoke color to give the black Versys a monochromatic look. It looks really good in my opinion. It took me a few minutes and a few "look overs" to like the larger appearance of the windscreen. I must say that I think it sets off the bike nicely and gives it a bold appearance with the black Versys. You can see through the smoked out plastic with ease. It doesn't black out your view during the day if you decide to look through it for whatever reason. I haven't experienced the night riding yet to report on that.

Adjustment

You may have to adjust the stock well nuts depending on your height. I am 6 foot 2 inches and am currently using the highest stock adjustment (the adjustment that requires the black plastic rivets to be removed). To remove the rivets, I locked on a vice grip and pulled them straight out and yanked the grips to the side quickly which snapped them in half. This did not damage the plastic housing whatsoever.

Wind Protection

There is a noticeable difference in wind protection due to the increased width of the MRA screen. However, I have not exceeded 45 mph as of yet, so I cannot comment on the buffeting. I will report that later on when I take the motorcycle on the freeway. At 45 mph I noticed the wind hitting my helmet, which could be a good or bad thing at high speed. Again, I will have to comment on that at a later time. Wind noise was reduced significantly.

Buzzing Noise

As many Versys owners know, there are numerous buzzing complaints around the cowling/speedo display area which can be caused by numerous issues depending on what year Versys you own. In my case, the buzzing was due to the stock windscreen. The buzzing noise was present in the 4-5k rpm range. After installing the MRA windscreen, I noticed an 80% reduction in buzzing which is hardly even noticeable anymore. It was obvious in my case that the buzzing was due to the stock windscreen. I added the Home Depot rubber washers as I talked about during installation. This helped reduce the buzzing by about 10% compared to OEM.

Pros

*Easy installation
*Improved wind protection
*Bold appearance (subjective)
*Reduction in 4-5k rpm buzzing

Cons

*Additional brackets are needed for installation (The look is not as clean underneath the windscreen because of this).
Attached Thumbnails
Click image for larger version

Name:	20121207_172942.jpg
Views:	511
Size:	41.6 KB
ID:	16345   Click image for larger version

Name:	20121207_172950.jpg
Views:	465
Size:	31.0 KB
ID:	16346   Click image for larger version

Name:	20121207_172955.jpg
Views:	541
Size:	24.8 KB
ID:	16347   Click image for larger version

Name:	20121207_173145.jpg
Views:	419
Size:	17.9 KB
ID:	16348   Click image for larger version

Name:	20121207_174319.jpg
Views:	451
Size:	31.1 KB
ID:	16349  

Click image for larger version

Name:	20121207_174331.jpg
Views:	439
Size:	25.8 KB
ID:	16350   Click image for larger version

Name:	20121207_174341.jpg
Views:	408
Size:	29.2 KB
ID:	16351   Click image for larger version

Name:	20121208_100236.jpg
Views:	431
Size:	36.7 KB
ID:	16352   Click image for larger version

Name:	20121208_100244.jpg
Views:	446
Size:	44.9 KB
ID:	16353  
Reply With Quote
Sponsored Links
Advertisement
 
  #2  
Old 12-08-2012, 01:46 PM
sanderm sanderm is offline
Member
 
Join Date: Oct 2012
Location: Dallas, TX
Posts: 9
Default UPDATE: Windscreen adjustment and performace at high speed

UPDATE:

After testing the MRA windscreen at high speed (65-85 mph) I have found out that my original windscreen setting (highest setting) was creating too much wind on my helmet. I adjusted the windscreen setting down a notch which actually angles the screen higher which causes the airflow to aim higher toward my helmet. There is less buffeting present. At this time I feel the ideal setting is a notch below the highest for a 6' 2" rider with a 34 inseam. I have attached photos so that you can see the different settings and the angle difference. I hope this helps those who decide to purchase this aftermarket windscreen!
Attached Thumbnails
Click image for larger version

Name:	20121208_125441.jpg
Views:	258
Size:	26.5 KB
ID:	16357   Click image for larger version

Name:	20121208_131822.jpg
Views:	249
Size:	26.5 KB
ID:	16358   Click image for larger version

Name:	20121208_132943.jpg
Views:	266
Size:	41.5 KB
ID:	16359  
Reply With Quote
  #3  
Old 12-10-2012, 01:34 PM
BigOleChalupa's Avatar
BigOleChalupa BigOleChalupa is offline
Member
 
2012 Kawasaki Versys
Join Date: Jul 2011
Location: Nova Scotia Canada
Posts: 398
Default

Thanks alot for taking the time to do this excellent write up!!
I bought one for myself this summer, and also added on the MRA X-Creen spoiler onto the top of it.
I liked the MRA alot, but once the x-creen is on, it was even better!!
Cheers
Bigo
Reply With Quote
  #4  
Old 12-10-2012, 06:50 PM
sanderm sanderm is offline
Member
 
Join Date: Oct 2012
Location: Dallas, TX
Posts: 9
Default

BigO, thanks for the response! I am thinking about the attachment too. Is it easy to remove if you dont want it on for city riding?
Reply With Quote
  #5  
Old 12-11-2012, 03:41 AM
Hades's Avatar
Hades Hades is offline
Member
 
Join Date: Dec 2011
Location: Kuala Lumpur, Malaysia
Posts: 105
Default

I got my MRA screen ( the Kawasaki OEM version ) about a month ago. Its a wonderful piece of equipment. The buffeting and all are greatly reduced. However a taller screen will be perfect. I dont know why the X Screen is so expensive, almost price for a new windshield.

Need to find a way to customise my own X Screen. Good choice for the this windshield. Highly recommended.
Reply With Quote
  #6  
Old 12-11-2012, 01:25 PM
BigOleChalupa's Avatar
BigOleChalupa BigOleChalupa is offline
Member
 
2012 Kawasaki Versys
Join Date: Jul 2011
Location: Nova Scotia Canada
Posts: 398
Default

Hey Sanderm.......the x-creen comes in 2 types. One that you permanently drill into the screen, and the other is a bolt on kit.
I drilled mine on! Here's my review and pics http://www.kawasakiversys.com/forums...ad.php?t=21118
I found that even in town, with the spoiler all the way down has doubled the wind protection!! I love it..................
BiGo
Reply With Quote
  #7  
Old 12-17-2012, 12:09 PM
yychow0812 yychow0812 is offline
Member
 
Kawasaki Versys
Join Date: May 2012
Location: Bangkok, Thailand
Posts: 92
Default

Quote:
Originally Posted by sanderm View Post
BigO, thanks for the response! I am thinking about the attachment too. Is it easy to remove if you dont want it on for city riding?
Thanks for the great write up. Two quick questions if you don't mind. How do you remove the stock well nuts? I gave up trying to pull them out and instead, push them back into the front cowling and hope they drop to the floor.

Secondly, where did you buy the OEM well nuts from?
Reply With Quote
  #8  
Old 12-17-2012, 10:35 PM
fasteddiecopeman's Avatar
fasteddiecopeman fasteddiecopeman is offline
Member
 
Join Date: Jul 2008
Location: Kelowna, BC - summer; Florence, AZ - winter
Posts: 5,678
Default

Quote:
Originally Posted by yychow0812 View Post
Thanks for the great write up. Two quick questions if you don't mind. How do you remove the stock well nuts? I gave up trying to pull them out and instead, push them back into the front cowling and hope they drop to the floor.

Secondly, where did you buy the OEM well nuts from?
Not sure if this will work, but try one of those magnets that looks like a pen so when you push them out so they don't get lost.
__________________
Ed

My KLR trip to Alaska, YT, NWT and BC in summer 2009
http://www.klr650.net/forums/showthread.php?t=69383

My Versys trip to D2D 2013, and Alaska, June '13
http://www.kawasakiversys.com/forums...ad.php?t=33153
Reply With Quote
  #9  
Old 12-18-2012, 02:06 AM
yychow0812 yychow0812 is offline
Member
 
Kawasaki Versys
Join Date: May 2012
Location: Bangkok, Thailand
Posts: 92
Default

Quote:
Originally Posted by fasteddiecopeman View Post
Not sure if this will work, but try one of those magnets that looks like a pen so when you push them out so they don't get lost.
The bottom grommets fall out easily. It's the top two that are a PITA. Sometimes, they get stuck on the metal bracket just behind the cowling. I guess you could try tipping the bike severely from one side to the other or in my case, I remove the front cowling to get to them. No bid deal, just a unnecessary inconvenience.
Reply With Quote
  #10  
Old 03-31-2013, 12:34 PM
Davy F's Avatar
Davy F Davy F is offline
Member
 
Kawasaki Versys
Join Date: Apr 2011
Location: Northern Ireland
Posts: 530
Default

Just ordered an MRA screen. Thanks for the write-up, very helpful.
__________________
Good luck exploring the infinite abyss
Reply With Quote
  #11  
Old 04-22-2013, 10:07 AM
Kawa007 Kawa007 is offline
Member
 
Join Date: Mar 2008
Posts: 566
Default

I'm about to pull the trigger on the MRA+xcreen any feedback from tall riders (I'm 6'1"). I have the tall Givi on my 2011, but it's just not quite tall enough to avoid buffeting on my helmet. I'm thinking the spoiler will help with that.

Thanks!
Reply With Quote
  #12  
Old 04-22-2013, 12:07 PM
Davy F's Avatar
Davy F Davy F is offline
Member
 
Kawasaki Versys
Join Date: Apr 2011
Location: Northern Ireland
Posts: 530
Default

I'm 5' 11" and wear an Arai TourX which, let's face it, isn't the best of lids for avoiding a bit of head nodding. The MRA I've just fitted is brilliant compared to the stock screen and it's amazing just how a different design (while not being a stupid massive piece of plastic bolted on) helps with wind flow. I love it !!




__________________
Good luck exploring the infinite abyss
Reply With Quote
  #13  
Old 04-22-2013, 12:23 PM
Kawa007 Kawa007 is offline
Member
 
Join Date: Mar 2008
Posts: 566
Default

I think when I receive the kit I'll install just the windscreen and try that, if its still not enough I'll put the spoiler...
Reply With Quote
  #14  
Old 04-22-2013, 01:43 PM
fasteddiecopeman's Avatar
fasteddiecopeman fasteddiecopeman is offline
Member
 
Join Date: Jul 2008
Location: Kelowna, BC - summer; Florence, AZ - winter
Posts: 5,678
Default

Davey - your yellow/ black V looks PDG, but what're those shiny things in front of your engine in pic #2???

__________________
Ed

My KLR trip to Alaska, YT, NWT and BC in summer 2009
http://www.klr650.net/forums/showthread.php?t=69383

My Versys trip to D2D 2013, and Alaska, June '13
http://www.kawasakiversys.com/forums...ad.php?t=33153
Reply With Quote
  #15  
Old 04-22-2013, 01:55 PM
Davy F's Avatar
Davy F Davy F is offline
Member
 
Kawasaki Versys
Join Date: Apr 2011
Location: Northern Ireland
Posts: 530
Default

Quote:
Originally Posted by fasteddiecopeman View Post
Davey - your yellow/ black V looks PDG
Thank you.

Quote:
Originally Posted by fasteddiecopeman View Post
but what're those shiny things in front of your engine in pic #2???

__________________
Good luck exploring the infinite abyss
Reply With Quote
Sponsored Links
Advertisement
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Advertisements
All times are GMT -5. The time now is 01:54 PM.


Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.

Motorcycle News, Videos and Reviews
Honda Grom Forum Harley Davidson Forum Honda 600RR Kawasaki Forum Yamaha R6 Forum Yamaha FZ-09 Forum
1199 Panigale Forum Roadglide Forum Honda CBR1000 Forum Vulcan Forum Yamaha R1 Forum Yamaha R3 Forum
Ducati Monster Forum Harley Forums Honda CBR250R Forum ZX10R Forum Star Raider Forum Yamaha Viking Forum
Suzuki GSXR Forum V-Rod Forums Honda Shadow Forum Kawasaki Motorcycle Forum Star Warrior Forum KTM Duke 390 Forum
SV650 Forum BMW S1000RR Forum Honda Fury Forum Kawasaki Versys Forum Drag Racing Forum Ducati 899 Panigale Forum
Suzuki V-Strom BMW K1600 Triumph Forum Victory Forums Sportbikes BMW NineT Forum
Volusia Forum BMW F800 Forum Triumph 675 Forum MV Agusta Forum HD Street Forum Suzuki GW250 Forum
Yamaha Motorcycles Victory Gunner Forum Honda Vultus Forum