Kawasaki Versys Forum banner

hbars with more rise, less pull back..

3K views 13 replies 8 participants last post by  Ivan V 
#1 ·
anyone replace their bars with ones with a little more rise and little less pull back?
 
#4 ·
You can adjust how much pull back you like with rox risers no?
 
#9 ·
Me too. The angle of the V bars is the only thing that really bothers me about this bike's ergo's. Kojack: if you find suitable replacement bars, likely paired with ROX risers, post a photo here...
 
#8 ·
Ah, my bad, it is that kinda pull back u mean...
 
#14 ·
As per Andrewhtf's post, stock measurements are close to this:
(I measured them off the bike and got similar numbers)

OEM:
A: 760
B: 130
C: 75
D: 190
E: 90
F: 240

I currently have these, but I prefer stock. I like more sweep and sportier bend. It may work for you Kojack. Or the 'High' version.

ProTaper SE ATV Low:
A: 813
B: 140
C: 88
D: 228
E: 84
F: 206

I want to try Renthal Road High bars. Maybe with some riser.

A: 710
B: 140
C: 88
D: 228
E: 84
F: 206


Handlebars change the character of the bike dramatically and you can't tell much from these dimensions if you haven't tried anything but stock. Buy some cheep/sellable ones to give you an idea.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top