Save time and money by doing your own chain swaps with this tool from the manufacturer of DID chains. A properly crimped rivet link on your motorcycle’s chain is critical for safety. DID’s KM500 chain tool is built to help you cut most chains to the proper length then set the connecting link plates in place at the correct depth and then rivet each pin perfectly.

These are not yet on our website. Call TJ at 866.931.6644 ext 817 and he’ll send one of this tool to you fast. You can also email him, FORUM at RIDERSDISCOUNT dot COM is the address, just be sure to put DID KM500 in the subject line.

Includes a handy carrying case and excellent instructions.
http://www.ridersdiscount.com/forum/did/did_cutting_and_riveting_tool_km500_6.jpg

http://www.ridersdiscount.com/forum/did/did_cutting_and_riveting_tool_km500_5.jpg

The tool in action, pressing a plate.
http://www.ridersdiscount.com/forum/did/did_cutting_and_riveting_tool_km500_4.jpg

Flaring a rivet.
http://www.ridersdiscount.com/forum/did/did_cutting_and_riveting_tool_km500_7.jpg

Nice, how much with shipping etc?

Machog

Sending PM now

It must be a secret...

It must be a secret...

The manufacturers have an advertising policy that limits us from posting anything but retail pricing. I like to do better then that for the forum members so if you are interested please let us know and I will get you the forum price.

TJ

Couldn't even find the thing on their web site but fount this
$105.20 at





I will take you back to our original post:

"These are not yet on our website. Call TJ at 866.931.6644 ext 817 and he’ll send one of this tool to you fast. You can also email him, FORUM at RIDERSDISCOUNT dot COM is the address, just be sure to put DID KM500 in the subject line."

The link you posted was for the KM501E not the KM500 completely different and at a price of $105.20 you would be paying too much for the KM501E.