RidersDiscount
03-03-2010, 10:18 AM
Pit Bull Forward Handle Rear Stands are the perfect solution for maintenance and storage of just about any motorcycle. There are three inherent advantages to this design over the conventional Pit Bull rear motorcycle stand.
They are:
1. Reduced storage space. The forward-facing handle does not stick out behind the rear wheel so the stand is no longer the limiting factor in where you can put the bike up. Perfect for anyone with limited space in the garage and there is less to trip over.
2. One person can hold the bike and put it up on the stand with one hand holding the bike and the other pushing the stand into place.
3. The lower crossbeam on the stand helps the user align it with the bike’s spools (though there is a spool-less version available as well).
Like other Pit Bull rear stands, the spool adaptors are adjustable to fit a wide range of swingarm sizes. One stand will work with many bikes.
Call TJ at 866.931.6644 ext 817 to order your own Pit Bull Forward Handle Rear Stand. If you have any questions for fitment or shipping, please send us a note – FORUM at RIDERSDISCOUNT dot COM is the address.
All Pit Bull stands are made in the USA.
http://www.ridersdiscount.com/forum/pit_bull_stands/forward_handle_rear_stand_pit_bull_6.jpg
Zinc-plating resists corrosion. Even the stainless steel hardware used to assemble the spool adapters are zinc plated!
http://www.ridersdiscount.com/forum/pit_bull_stands/forward_handle_rear_stand_pit_bull_5.jpg
High-quality welds are used to assemble the stand.
http://www.ridersdiscount.com/forum/pit_bull_stands/forward_handle_rear_stand_pit_bull_4.jpg
Even the stand’s wheels have the Pit Bull touch.
http://www.ridersdiscount.com/forum/pit_bull_stands/forward_handle_rear_stand_pit_bull_3.jpg
Spooled adaptors are adjustable for both height …
http://www.ridersdiscount.com/forum/pit_bull_stands/forward_handle_rear_stand_pit_bull_2.jpg
… and width to suit your motorcycle.
http://www.ridersdiscount.com/forum/pit_bull_stands/forward_handle_rear_stand_pit_bull_1.jpg
As an example, this GSXR is held up with a regular Pit Bull rear stand …
http://www.ridersdiscount.com/forum/pit_bull_stands/forward_handle_rear_stand_pit_bull_7.jpg
… while this one uses a Pit Bull Forward Handle rear stand, saving almost a foot-and-a-half of space. And, as noted, it’s very easy to operate without any help.
http://www.ridersdiscount.com/forum/pit_bull_stands/forward_handle_rear_stand_pit_bull_8.jpg
They are:
1. Reduced storage space. The forward-facing handle does not stick out behind the rear wheel so the stand is no longer the limiting factor in where you can put the bike up. Perfect for anyone with limited space in the garage and there is less to trip over.
2. One person can hold the bike and put it up on the stand with one hand holding the bike and the other pushing the stand into place.
3. The lower crossbeam on the stand helps the user align it with the bike’s spools (though there is a spool-less version available as well).
Like other Pit Bull rear stands, the spool adaptors are adjustable to fit a wide range of swingarm sizes. One stand will work with many bikes.
Call TJ at 866.931.6644 ext 817 to order your own Pit Bull Forward Handle Rear Stand. If you have any questions for fitment or shipping, please send us a note – FORUM at RIDERSDISCOUNT dot COM is the address.
All Pit Bull stands are made in the USA.
http://www.ridersdiscount.com/forum/pit_bull_stands/forward_handle_rear_stand_pit_bull_6.jpg
Zinc-plating resists corrosion. Even the stainless steel hardware used to assemble the spool adapters are zinc plated!
http://www.ridersdiscount.com/forum/pit_bull_stands/forward_handle_rear_stand_pit_bull_5.jpg
High-quality welds are used to assemble the stand.
http://www.ridersdiscount.com/forum/pit_bull_stands/forward_handle_rear_stand_pit_bull_4.jpg
Even the stand’s wheels have the Pit Bull touch.
http://www.ridersdiscount.com/forum/pit_bull_stands/forward_handle_rear_stand_pit_bull_3.jpg
Spooled adaptors are adjustable for both height …
http://www.ridersdiscount.com/forum/pit_bull_stands/forward_handle_rear_stand_pit_bull_2.jpg
… and width to suit your motorcycle.
http://www.ridersdiscount.com/forum/pit_bull_stands/forward_handle_rear_stand_pit_bull_1.jpg
As an example, this GSXR is held up with a regular Pit Bull rear stand …
http://www.ridersdiscount.com/forum/pit_bull_stands/forward_handle_rear_stand_pit_bull_7.jpg
… while this one uses a Pit Bull Forward Handle rear stand, saving almost a foot-and-a-half of space. And, as noted, it’s very easy to operate without any help.
http://www.ridersdiscount.com/forum/pit_bull_stands/forward_handle_rear_stand_pit_bull_8.jpg