|
brian_nbmc 03-12-2008, 03:34 PM Does anyone know the bolt size and pitch of the rear swingarm spool mounting points. I have tried a couple of 10mm bolts, but the thread pitch must be wrong because I can not thread it in by hand and I don't want to wreck the threads. I am trying to make my own rear stand mounting points. Thanks Brother Verse Us 03-13-2008, 02:18 AM The bolt size is 10mm x 1.25. When I was installing the spools I noticed that the bolts were not going in smoothly. The bolts went in fine once I cleaned out the threads. crazydave58 04-04-2008, 11:27 AM I got these 10mm spools off ebay and they fit just fine..hope I inserted the URL correctly....tunerx-factory....http://cgi.ebay.ca/10mm-Swingarm-Sliders-Spools-II-ZX6R-ZX14-ZX10R-Z1000-T_W0QQitemZ370037268389QQihZ024QQcategoryZ35580QQt cZphotoQQcmdZViewItem bear 04-30-2008, 12:38 PM i just got mine and worked fine: vortex 10mm myorangecamaro 05-05-2008, 12:56 AM What exactly is the spool? is it just like a frame slider? crazydave58 05-05-2008, 12:32 PM I think the swing arm spools serve as sliders as well as a place for your rear wheel lift to hook onto...there designed defferently from frame or front axle sliders...just an uneducated guess....:rolleyes: | ||