Hooligan
11-15-2008, 12:49 PM
PRICE LOWERED TO $6500.00
My neighbor bought this to commute on. He road it a few times and did not feel comfortable on it so he asked me to help him sell it. It has 113 miles on it. It fell over in his driveway and put a couple of scratches on it, (see picture). It has a big storage area under the seat and a trunk as well. It has all of the options on it including a button that locks the front wheels as you slow to a stop so you don't even have to put your feet down at a light. It was $8600.00 out the door. He is asking $7500.00. His name is Chris and you can call him direct at 770-367-3731. I have ridden this thing a couple of times...the grin factor is high. I would love to take it up to 129.
PIAGGIO MP3: TECHNICAL SPECIFICATIONS 250
Engine Single-cylinder QUASAR, 4-stroke, 4-valve, electronic injection, catalysed
Displacement 244.3 cc
Bore 72 mm
Stroke 60 mm
Fuel Unleaded
Compression ratio 10.5 :1
Max power 22.5 bhp (16.5 Kw) at 8,250 rpm
Max torque 21 Nm at 6,750 rpm
Cooling Liquid
Gearbox ‘Twist and go’ automatic CVT, torque server
Ignition Port Injected Alfa/n type with closed loop system,
Lambda sensor in exhaust pipe and three-way double catalytic
converter
Start Electric (freewheel) with torque limiter
Frame Twin cradle: tubes in high tensile steel
Front suspension Parallelogram composed of four aluminium
arms supporting two steering tubes, cantilevered suspension –
Travel: 85 (mm)
Rear suspension Two dual effect hydraulic shock absorbers and adjustable spring preload – Travel: 110 (mm)
Front brake Two stainless steel disks, Ø 240 mm and floating calliper with two pistons, Ø 30 mm
Rear brake Stainless steel disk, Ø 240 mm and calliper with opposite pistons, Ø 30 mm
Front wheel rim Die-cast aluminium alloy, 12" x 3.00
Rear wheel rim Die-cast aluminium alloy, 12" x 3.50
Front tyre Tubeless 120/70-12” 51P
Rear tyre Tubeless 130/70-12” 62P
Length/Width 2,130 mm/745 mm
Wheelbase 1,490 mm
http://i8.photobucket.com/albums/a28/K4XA/ChrisMP3/M307.jpg
http://i8.photobucket.com/albums/a28/K4XA/ChrisMP3/M308.jpg
http://i8.photobucket.com/albums/a28/K4XA/ChrisMP3/M306.jpg
http://i8.photobucket.com/albums/a28/K4XA/ChrisMP3/M309.jpg
http://i8.photobucket.com/albums/a28/K4XA/ChrisMP3/M310.jpg
http://i8.photobucket.com/albums/a28/K4XA/ChrisMP3/M311.jpg
http://i8.photobucket.com/albums/a28/K4XA/ChrisMP3/M312.jpg
The factory sticker in the trunk says "NO PETS" :crackup:
My neighbor bought this to commute on. He road it a few times and did not feel comfortable on it so he asked me to help him sell it. It has 113 miles on it. It fell over in his driveway and put a couple of scratches on it, (see picture). It has a big storage area under the seat and a trunk as well. It has all of the options on it including a button that locks the front wheels as you slow to a stop so you don't even have to put your feet down at a light. It was $8600.00 out the door. He is asking $7500.00. His name is Chris and you can call him direct at 770-367-3731. I have ridden this thing a couple of times...the grin factor is high. I would love to take it up to 129.
PIAGGIO MP3: TECHNICAL SPECIFICATIONS 250
Engine Single-cylinder QUASAR, 4-stroke, 4-valve, electronic injection, catalysed
Displacement 244.3 cc
Bore 72 mm
Stroke 60 mm
Fuel Unleaded
Compression ratio 10.5 :1
Max power 22.5 bhp (16.5 Kw) at 8,250 rpm
Max torque 21 Nm at 6,750 rpm
Cooling Liquid
Gearbox ‘Twist and go’ automatic CVT, torque server
Ignition Port Injected Alfa/n type with closed loop system,
Lambda sensor in exhaust pipe and three-way double catalytic
converter
Start Electric (freewheel) with torque limiter
Frame Twin cradle: tubes in high tensile steel
Front suspension Parallelogram composed of four aluminium
arms supporting two steering tubes, cantilevered suspension –
Travel: 85 (mm)
Rear suspension Two dual effect hydraulic shock absorbers and adjustable spring preload – Travel: 110 (mm)
Front brake Two stainless steel disks, Ø 240 mm and floating calliper with two pistons, Ø 30 mm
Rear brake Stainless steel disk, Ø 240 mm and calliper with opposite pistons, Ø 30 mm
Front wheel rim Die-cast aluminium alloy, 12" x 3.00
Rear wheel rim Die-cast aluminium alloy, 12" x 3.50
Front tyre Tubeless 120/70-12” 51P
Rear tyre Tubeless 130/70-12” 62P
Length/Width 2,130 mm/745 mm
Wheelbase 1,490 mm
http://i8.photobucket.com/albums/a28/K4XA/ChrisMP3/M307.jpg
http://i8.photobucket.com/albums/a28/K4XA/ChrisMP3/M308.jpg
http://i8.photobucket.com/albums/a28/K4XA/ChrisMP3/M306.jpg
http://i8.photobucket.com/albums/a28/K4XA/ChrisMP3/M309.jpg
http://i8.photobucket.com/albums/a28/K4XA/ChrisMP3/M310.jpg
http://i8.photobucket.com/albums/a28/K4XA/ChrisMP3/M311.jpg
http://i8.photobucket.com/albums/a28/K4XA/ChrisMP3/M312.jpg
The factory sticker in the trunk says "NO PETS" :crackup: