I am installing the H&B crash bars and would like to know what should the two main bolts be tightened to? The two that go into the engine mount. I would assume to 32 ft lbs. as would the regular bolts that came out. But I did not see any info in the instructions. Any help would be appreciated.:confused:

Yes, 32 ft-lbs as specified for the stock bolts... You could shim it out on both sides while the bolts are out, if you haven't already:
http://www.kawasakiversys.com/forums/showthread.php?t=239&highlight=frame+crack

Thanks for the info I did not do that while I had it apart but I will do it soon. It needs to be done as there is a gap on both sides. Thanks again.:thumb: