Okay, I finally found the time to replace the stock rear turn signals. The GIVI relocation kit was functional but certainly not attractive. I did some measurements at my dealer and decided that the ZX6R signals are a little shorter and will clear the bags with no trouble. Unfortunately, my dealer kept screwing up my order so I ordered them from Bike Bandit. :thumb:

As an added bonus, no rewiring is needed as the plugs are a direct fit. Even the color coding is correct. The first picture is the before. The second shows the contast with the left done and the right to be done. The final picture shows the finished product. I am happy with the results.

Ed

Those look great! Do they have similar style front signals? And is the bulb amber, so I could put in a amber/clear bulb to get the no orange look? I love how they slim out the bike.

No, the fronts are not similar. The bulbs are amber so you could certainly switch them out.

Ed

Nice!

Post up some pics with the bags mounted if you can. :D

Looks great! BTW - If you look under 2006 ZX-6R (BikeBandit) you can get the matching fronts as well.

Thanks!
Jim

I mentioned that the dealer screwed up my order. Turns out, they didn't cancel the order so I had another set of ZX6R rears come in. Guess what. They look great on the front too!

Here are a few pictures.

Ed

i have clear lenses on order they're the rear lenses off a zx10

Looks great Ed!! I ended up ordering z1000 clear lenses & amber bulbs for the rear. As it turns out, my Givi rear signal relocators work with both the PL447 side racks and FZ447 top case rack. So I'm sticking with the original signals and just changing over to clear lenses to match the clear taillight. :D

Ride safe,
Jim