Kawasaki Versys Forum - View Single Post - Some electrical problems
View Single Post
post #11 of (permalink) Old 11-29-2016, 09:19 PM
Super Moderator
Join Date: Nov 2008
Location: Kitchener Ontario
Posts: 2,737
MK-1 Bad Frame ground

This has happened before, what was found was a bad/ corroded frame ground. The ECU uses the frame ground for some things and is not directly connected to the negative wiring, primarily dependent on a good clean connection at the frame ground. I would take that apart and make sure all crimp connectors are clean and in good shape, been said here before to use a good dielectric grease, also to clean the ground and terminals use a green or red scotch brite pad, you know some of those pot scrubber sponges have them on the backside.
onewizard is offline  
For the best viewing experience please update your browser to Google Chrome